PURETEC - WATER FILTERS

Replacement 10" Pleated Sediment Cartridge 20 Micron Water Filter ABPL1025

Name: Replacement 10" Pleated Sediment Cartridge 20 Micron Water Filter ABPL1025
Brand: PURETEC - WATER FILTERS
Price: 12.0 AUD
Availability: InStock

$12.00 AUD

Sale Sold out

Taxes included.

View full details

Description Compatible Model Installation Guide Certification & Warranty

10″ x 2.5″ Washable Pleated Sediment Filter

Pleated sediment filter cartridges are constructed from pleated polypropylene, this technique means there is no center core to restrict filter performance.
These filters are a terrific opportunity to purchase extremely high quality filters at a VERY low price. They are best suited for tank water, rivers, creeks or streams. Anywhere where there is a heavy level of debris or sediment in the water, which may cause standard filters to block prematurely.
Pleated filters have up to 20x’s more surface area than a standard polyspun filter!
This gives them a higher surface area to catch more debris and a much longer life duration before replacement is necessary. They can be washed and removed tima and time again, until they begin to perforate, then they will need to be replaced.

20 Micron Pleated Sediment Filter 10″ X 2.5″

– Washable Pleated Sediment Filter
– Pleated design maximizes dirt-holding capacity.
– Ideal for pre-filtration in high sediment applications.
– Durable polyester media is bacteria and chemical resistant.

MATERIALS OF CONSTRUCTION

– Filter Media
– Non-Woven Polyester Fabric
– End Caps
– Vinyl Plastisol
– Core Polypropylene

Specification

– Model Number: ABPL1025
– Operating Flow: 0 – 90 Lpm
– Operating Temperature: 0 – 50°C
– Operating Pressure: 20 – 800 kPa
– Micron Rating: 20 Micron
– Size: Standard 2.5” x 10”

Compatible Models

Please refer to the product description above for compatible filter numbers, refrigerator models and system model information.

Need Help Confirming Compatibility?

If you cannot find your model number or are unsure whether this product is suitable for your refrigerator or filtration system, please contact us before purchasing.

General Installation Guide

Please use the general guide below to help identify your filter type and follow the correct replacement process. Filter location and replacement steps may vary depending on your refrigerator or water filtration system model. Always refer to your appliance manual for the exact filter location and specific instructions.

General water filter installation guide for refrigerator, under sink and whole house filters

Need Help Finding the Correct Filter?

Before ordering, compare your old filter, check the model number or filter code and confirm the connector type. If you are unsure, please contact Water Filter Distributors for assistance.

Water Filter Distributors ordering guide and product support information

Whole House System Installation Manual

For whole house filtration systems, please refer to the detailed installation manual below. Professional installation by a licensed plumber is recommended.

View Whole House Installation Manual

Twin Cartridge Under Sink Installation Guide

For twin cartridge under sink systems, please refer to the installation guide below. This guide is suitable for systems supplied with a dedicated faucet, diverter valve, tubing and installation kit.

Twin cartridge under sink water filter installation guide

Important Installation Notes

Filter location and replacement steps may vary depending on your appliance or filtration system model.
Always compare the new filter with your existing filter before installation.
Remove all protective caps, plugs and packaging before installation.
Flush approximately 5–10 litres or 3–5 minutes of water after installing the new filter.
Use with cold potable water only unless the product instructions specifically state otherwise.
Check all connections carefully for leaks after installation.
Always follow your appliance manufacturer's instructions where applicable.

Need Installation Assistance?

If you are unsure how to install this product, please send us your refrigerator model number, filtration system model number or a clear photo of your existing filter and connections.

Certification & Quality Assurance

Water Filter Distributors is operated by Mexi Trading Pty Ltd, an Australian owned and operated company. Our products are supplied with a strong focus on quality, safety and trusted filtration performance.

Water Filter Distributors certification and quality assurance information

Important Certification Notice

Certification details may vary depending on the specific product model.
Please refer to the product description, packaging or official documentation for model-specific certification information.
If you require confirmation for a specific product, please contact Water Filter Distributors before purchasing.